200 Meter VGA (HD15) Extender via single CAT5, CAT6 Cabling with Audio Transmission - VGA Balun

This VGA-Audio Extender can transmit VGA & Audio up to 200 meter away from a VGA source / PC or notebook using CAT5/5e/6 cable. The VGA-Audio extender consists of a local unit that connects to a computer VGA Port and also supplies VGA video and stereo audio to a local monitor and speaker, and a remote unit that connects to a monitor and speaker.

• Sharpest and clearest VGA quality over CAT5/6 Cabling
• Hi performance Audio quality over CAT5/6 Cabling
• Supports local and remote VGA monitors and Speakers.
• Real Time Transmission of Video & Audio signals by single CAT5/6 cable
• Plug and Play, compatible with all format VGA video signals.
• Contract and RGB brightness adjustment (Receiver Side)
• Power-red LED. Metal case (Sender, Remote Unit)
  

Local Unit & Remote Unit – Transmitter/Sender

- Supports a PC, SUN, MAC, PC Switch or any other VGA Player / source device.
- Female 15-pin HD connector for computer connection.
- Stereo audio support - 3.5mm stereo plug.

Remote Unit- Receiver/Remoter

- Supports resolutions on VGA Port from 640X480 up to 1920x1440
- One 3.5mm connector for audio output connection.

Local Access

- Crisp and clear 640X480 to 1920x1440 video resolutions.
- Female 15-pin HD and 3.5mm stereo connectors for local VGA monitor and
speaker.

Power

- 9V to +12V DC/500mA via AC/DC adapter
- 3.5mm male stereo audio cable
- Power consumption: 2W

Cables

CAT6e STP Full Copper Cabling recommended for optical transmission lengths recommended with TIA/EIA-568B wiring terminated with standard RJ45 Shielded Connectors connectors (Cable and connectors not included).

Video Quality and Adjustment

• The VGA-Audio Remote Unit can set video quality brightness, contract adjustment for
  different lengths of CAT5/5e/6 cabling.
• Stereo/Audio can be heard both locally and remotely
• Frequency response : 20 Hz to 20 kHz, +/-1 dB.
• Signal-to-Noise Ratio (SNR) : 76 dB.
• Total Harmonic Distortion and Noise (THD+N) : 0.017%
• Input impedance : 10k Ohms.
• Line level 640ohm output supports multimedia speakers.
• Maximum I/O levels : 3.1Vp-p (line level)
• Video Input / Output : HD-15 Female (VGA, RGBHV) (75ohm load)
• Video Input Signal : 0.5Vp-p - 1Vp-p Single End
• Video Transmission Distance: 200 meter (CAT6e full copper cable)
• Audio Input: 3.5mm Stereo Female Socket
• Audio Output: 1Vp-p – 2Vp-P Single End¿300/640 ohm load¿
• Audio CMRR: -80dB @1kHz
• Video CMRR: -55dB @1MHz
• Audio Transmission Distance: 200 meter (CAT6e full copper cable)
• External Power Supply: +9V to +12V DC