MTD8 (with battery backup for your geyser / pool pump)
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
Switching times = 8 ON, 8 Off, up to 128 programmes in a week
Switching load = 20 Amps, 4600 Watts
Power supply 230V AC 50Hz
Accuracy = 1minute / month
Minimum Time Set: 1 minute
Backup battery = Rechargeable Ni-MH 1.2V, 100 Hours
Operating temperature = -10°C to +40°C
Buy 6pcs and get FREE postage!
Additional info:
- 8 buttons for easy operation
- Large LCD display with real time display
- 24 hours and 7 days programming with reset function for switching loads up to 4600 watts
- Built-in rechargeable Ni-MH battery to maintain the real time clock and programmed times when there is a power failure
- Ideal for industrial uses, geysers, swimming pools, Security lights, Heaters and Air Conditioners
This MTD8 timer can accommodate appliance power ratings of up to 4,6kW.
This MTD8 timer fits Din rail DB - for other DBs, purchase an adapter
This MTD8 measures approx 84mm high, 43 to 57mm deep, and 34mm wide
Should you have a geyser or appliance with power rating greater than 4,6kW, use this MTD8 timer in conjunction with a relay (available from your electrical distributor) to avoid damage to the MTD8 timer
Tips:
At the top of the MTD8, connect black/neutral to 2 and red/live to 1. Charge it for a few hours (it's easier to program before installation). Also bridge 1 to 4 as per instruction manual.
Set the clock to 24hr mode - this will make programming ON/OFF times easier.
Connect red and black from DB power source to top inputs.
Bridge top left and bottom left red.
Connect your appliance blue with top black, brown with bottom input 3 or 5.