Fencing pliers with an added function of pulling wire unusually tight around any object

All our items offered on Bid or Buy, are now available to buyers on credit card (bobPay – Credit Card Online). Please enjoy your shopping with us.

Applications for the pliers

• Can pull wire very tight around low density water pipes therefore sealing connections completely water tight even under high pressure
• Can pull wire very tight around wooden poles to prevent poles cracking at the ends
• Can be used to connect single strands of wire for example connecting fencing wire that was cut
• Very handy to bind wire to droppers when doing fencing and to wind thinner wire around thicker wire

How does it work:

Create a wire-clamp by winding wire 2x around the pipe of choice. Leave a length of about 100mm wire to the one end and 150mm wire on the other end. The beginning length and end length should be in line. (See picture). Remove the wire-clamp from the pipe.

Open the pliers with its handles past the horizontal line. Put the shorter end of the wire-clamp through the hole in the left handle with the coiled circle of the wire-clamp pointing upwards.

Bend the length of wire protruding from the hole upwards around the handle, to the right of the coil. Press the coil horizontally down onto the pliers. The left side of the wire-clamp is now fixed to the handle of the pliers. The longer end of the wire will be in line with the pin on the other handle.

Bend the wire around the pin on the other handle and downwards around the handle, much like the previous step but ensure that the wire is supported by the pin before wrapping it around the handle a few times. This ensures that the wire stays in place once tension is applied to the pliers.