This item has closed 1 buyer bought 1 item
View other items offered by The World OnLine10152
.jpg){kind=link}
Pocket Digital PH Meter Test Pen TDS Tester Multifunction Water Quality Tester
New
Indicative market price: R306
R255.00
17% OFF
Closed
18 Oct 16 03:08
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Product information
Condition:
New
Location:
South Africa
Product code:
UPC920758
Bob Shop ID:
230237011
PH Value Test Pen TDS Tester Water Quality Tester
Specification:
Color: Yellow
Name: Pocket Digital PH Meter
Batteries: 3 x 1.5V(Battery is included)
Accuracy: ±0.1PH
Typikal EMC DEV: ±0.2ph
Measurement Range: 0.00-14.00PH
Resolution: PH 0.1
Environment: 0 ¿ to 50 ¿
Life: Approx.700hours of use
Relative Humidity: <95%
Trimming: By potentiometer
Size: 150mm(L)×29mm(W)×20mm(H)
Weight: 51g
Operation:
1. Remove the protective cap.
2. First rinse the electrode with distilled water, and suck it with filter-paper.
3. Turn on PH by "ON-OFF"switch located on the top of battery case.
4. Immerse the PH meter electrode in the solution to be tested.
5. Stir gently and wait for the reading to stabilize.
6. After use, Switch off PH, Use the distilled water clean the electrode and replace the protective cap.
Package include:
1 x Pocket Digital PH Meter
2 x PH Substances
1 x Product specification
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Pocket digital pen PH meter, more accurate detection, error ±0.1, greatly reducing the volume, reduce costs, high stability and reliability, easy to use and inexpensive. Now, pen PH meter gained popularity and popular around the world.
Specification:
Color: Yellow
Name: Pocket Digital PH Meter
Batteries: 3 x 1.5V(Battery is included)
Accuracy: ±0.1PH
Typikal EMC DEV: ±0.2ph
Measurement Range: 0.00-14.00PH
Resolution: PH 0.1
Environment: 0 ¿ to 50 ¿
Life: Approx.700hours of use
Relative Humidity: <95%
Trimming: By potentiometer
Size: 150mm(L)×29mm(W)×20mm(H)
Weight: 51g
Operation:
1. Remove the protective cap.
2. First rinse the electrode with distilled water, and suck it with filter-paper.
3. Turn on PH by "ON-OFF"switch located on the top of battery case.
4. Immerse the PH meter electrode in the solution to be tested.
5. Stir gently and wait for the reading to stabilize.
6. After use, Switch off PH, Use the distilled water clean the electrode and replace the protective cap.
Package include:
1 x Pocket Digital PH Meter
2 x PH Substances
1 x Product specification
In the following cases, PH meter must be recalibrated:
1. After calibration has been used (or place) for a long time
2. Frequent use of special electrodes;
3. Accuracy requirements are relatively high.