Playstation 2 ModBo 4.0 mod-chip for all PS2 models
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
Modbo 4 for PS2 Works in all Models
Brand new Modbo 4.0 mod chip. Excellent performance. Don't be fooled by these plug in modchips, they cause more trouble than they are worth !!! Note installation should be carried out by a person competent at soldering
Modbo 4.0 is an excellent quality mod chip for all Playstation 2 models including SCPH 79002
PS2 Modbo 4.0 has all the features of more expensive PS2 Chips
The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v18 which means they are compatible with the newly released SCPH-9000x consoles. The Modbo v4.0 PS2 Mod Chip is the latest chip from the guys at Modbo. The ModBo 4 is considered one of the most universally compatible PS2 Mod Chips on the market today.
Mod Chip users rave about its better compatibility with DVD 9 games, the Modbo 4.0 runs dual layer much better then older models. Modbo 4.0 comes on a differently layed out pcb to earlier model Modbo chips for a slightly neater install. It also have the ability to turn your PS2 into a totally DVD Region Free Player, as well as removes Macrovision protection from DVD Movies so that you can record your DVD movies to VHS tapes directly from your PS2 DVD Drive. Excellent chip for end users as well as installers. No more guessing which model PS2 you have, because this ps2 mod chip will just do it all.
A major difference between Modbo 4 and Modbo 745 is the Modbo 4.0 works from v5 to v18 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.
| Product Information |
- Fully compatible with ps2 v1-v18 PAL / USA / Jap
- Upgraded from modbo3.0, comes with original 100% v1.88 firmware, but it isn't upgradeable
- Comes with mini size board and the wiring point order is good for installation
- Automatic selection for PS2/PS1/DVD supports
- DVD region free incorporated
- Software selectable "PS2 Quick Load" option. (to skip PS2 logo and Quick boot PS2 games)
- Software selectable "PSX Quick Load" option (to skip PS1 logo and Quick boot PSX games)
- Easy to install (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13 - V18)
- CPLD chip (3.3V power supply) based IC for enhanced stability
- Automatic "MACROVISION=OFF" on all PS2 from V3 to V18 without additional wires
- Automatic "green fix" (no more need to change the cable to see your DVD movies on the PS2)
- Imports games fix (all PSX import games are played at full screen and full color
- Stealth-mode (the modchip can be switched off and becomes invisible to online gaming)
- Sleep-mode (the modchip will switch off itself after boot)
- Supports DVD-9 games
- Plays all CD's and DVD's games (both, import or backup's)
- Supports multi-disk games
- Supports anti-mod PS1 games (only for V9 - V18 PS2)
- Very reliable (all the Modchips are 100% tested before delivery)
- Very stable (thanks to sleep mode the IC will never overheat)
- CD lens safe (avoid CD lens damage by sending un-necessary signal to drive controller)
- Supports DEV1 and DEV2 for memory card booting
| New Features |
