*** SPECIAL *** - PA Speaker, Wharfedale TITAN12 Active, Each

*** SPECIAL *** - Free P&P (insured) anywhere in SA included !

PA Speaker, Wharfedale TITAN12 Active, Each. Can be used as stage monitor too.

Specifications:

General Info: 

• System type: Active 12” 2-way Bi-Amplified system
• Frequency response +/- 3db: 55-20kHz

LF Driver:

• LF Driver Size: 305mm 4 ohm
• LF Voice Coil Size: 64.26mm

HF Section:

• HF Voice Coil Size: 51mm 8 ohm
• HF Exit Size: 25mm
• HF Type: Compression Driver
• HF Diaphragm Material: Titanium
• Horn Dispersion (H x V): 90 x 60mm
• HF Horn Shape: EWG™ - Elliptical Waveguide

Crossover Section:

• Crossover Frequency/Filter: 2.3kHz, 24dB per octave Linkwitz-Riley
• HF Driver Protection: Independent LF and HF limiters

Amplifier Power:   

• Continous RMS: LF 250W, HF 50W
• Peak (Wats): LF 500W, HF 100W
• Protection Type: Power switch on/off mute, Thermal Amplifier shutdown/auto reset, Low line voltage shut down at 60% nominal line voltage, DC Protection, Short protection, Clip limiter turns on approx at 250W with red LED indicator
• Power on Indicator: LED

Input Sensitivity:

• Mic: -36dBu (-38.2dBv or 12.28mVrms)
• Rca: RCA: 0dBu (-2.2dBv or 0.775Vrms)
• Line: +4dBu (1.78dBv or 1.228Vrms) Maximum Input Level +22dBu

Input Impedance:   

• Line input A: 20k? - Unbalanced: 10k? Maximum Input Level +22dBu
• Line input B: 20k? - Unbalanced: 10k? Maximum Input Level +22dBu+BV22
• Main eq: High (±10dB) 10kHz Shelving
• Main eq: Low (±10dB) 100Hz Shelving, Bass Response Optimizer ("BRO”™) circuit '+5dB at 60Hz, Subsonic Filter 30Hz, Second-order filter

Connectors: 

• Input Connectors A: Switchable balanced mic or line level input XLR/¼” Combo jack
• Input Connectors B: Line level combo jack: 1/4" -XLR/Summed dual RCA jacks
• Line Output Type: Switchable LOOP/MIX Balanced Male XLR connector, Balanced: 1k ohm - Unbalanced: 500 ohm, +4dBu (1.78dBv or 1.228Vrms)

Physical Features:

• Enclosure Type: Molded Polypropylene
• Finish: Grey or white
• Handle Quantity: 2 carry handles (one on each side)
• Suspension Points: (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
• Stand Adapter - BOTTOM: Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket

Dimensions & Weight:

• Height: 556mm
• Width Front / Rear: 384mm
• Depth: 312mm
• Net Weight: 12.8kg
• Gross Weight: 14.8kg